SecurView DVRSVIEWxV4 Instrukcja Użytkownika Pobierz pdf (Strona 8)

To Set Up Recording Rates

Right click to open the menu and select MAIN MENU, then select SETTINGS followed by ENCODE.

Here you may can set individual encoding options for Regular, Motion Detect and Alarm Recording.

While any of the cameras may be set higher, please be aware that it will reduce the total recording time

to less than 2 weeks. We recommend:

CIF cameras: Set to H.264 with a 352x288 resolution, 10fps, Bit Rate CBR of 320kbps.

D1 cameras: Set to H.264 with a 704x576 resolution, 10fps, Bit Rate CBR of 768kbps.

Important: The EXTRA STREAM MUST be enabled if you wish to remote access the DVR system. We

recommend that it is always set to CIF

resolution, 10fps, Bit Rate CBR of 320kbps

To Begin Recording

Once you have successfully set up the cameras, exit the Menu by right clicking or pressing the CLOSE

button. By default, the DVR will begin recording when it is properly connected to the cameras and has an

installed HDD. If it is recording, the recording icon “

” will be displayed on screen.

Automatic Overwriting:

When the system is in full, the oldest recorded data will be overwritten automatically. This DVR

System is set to Overwrite by factory default but can be changed in the “GENERAL” Menu.

Record Times:

The DVRSVIEWxV4 system is capable of storing up to 2 week of recorded footage based on 2Tb

of storage and 16 Cameras set to D1 @ 10fps and CBR @ 768kb/s

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Brak uwag

SecurView DVRSVIEWxV4 Instrukcja Użytkownika Strona 8